|
|
|
|
|
|
ALLANSON 272-AT - 120 VOLT - 1 TO 2 LAMP - 4' FT TO 12' FT - FLUORESCENT SIGN BALLAST
|
Our Price: $59.97
|
|
|
- Manufacturer: Allanson
- Manufacturer's Part #: 272-AT
- Fluorescent Sign Ballast
- 1 To 2 Lamps
- 4' FT - 12' FT
- Voltage: 120 Volt
- Input Wattage: 475
Ferromagnetic High Output Fluorescent Ballast
- Reliable cold-weather operation
- Small Housing Size
- Lowest current draw
(The difference between whether or not to add another costly primary circuit) - For use with Rapid start lamps
(2 pins or hot cathode.) - Recommended for Fluorescent Lighting in Outdoor Sign applications
- 800 mA output for HIgh Output Fluorescent lamps, provides higher light
output, increasing the brilliance of your electrical sign - Thermally protected class "P" ballasts, automatically turn off when the
ballast is hot, thus extend the longevity of the ballasts - High power factor, 277 and 347 volt models reducing operation and installation costs
|
|
|
|
|
|
|
|
|
|
TRANSCO - TRA-696-3048 BALLAST For 4-6 Lamp 30'-48'
|
|
Our Price: $121.73
|
|
|
- Manufacturer: Transco or Allanson
- Manufacturer's Part #: TRA-696-3048 or 696-AT
- 4 to 6 Lamps
- 30' FT - 48' FT
- Voltage: 120 Volt
- Starting Method: Rapid Start (RS)
- Line Current: 2.8 Amps
- Substitute for Allanson Ballast if wiring and dimensions are the same
Allanson technical information can be found here: 696-AT Allanson Specs
** Also Check out Allanson Sign Ballast **
Note* Depending on vendor availability on Transco Ballasts, vendor may ship Allanson sign ballast
Both Transco & Allanson ballast are compatible with wiring configurations.
|
|
|
|
|
|
|
|
|
|
TRANSCO - TRA-672-2436 BALLAST For 4-6 Lamp 24'-36'
|
|
Our Price: $102.89
|
|
|
- Manufacturer: Transco or Allanson
- Manufacturer's Part #: TRA-672-2436 or 672-AT
- 4 to 6 Lamps
- 24' FT - 36' FT
- Voltage: 120 Volt
- Starting Method: Rapid Start (RS)
- Line Current: 2.8 Amps
- Substitute for Allanson Ballast if wiring and dimensions are the same
Allanson technical information can be found here: 672-AT Allanson Specs
** Also Check out Allanson Sign Ballast **
Note* Depending on vendor availability on Transco Ballasts, vendor may ship Allanson sign ballast
Both Transco & Allanson ballast are compatible with wiring configurations.
|
|
|
|
|
|
|
|
|
|
TRANSCO - TRA-496-2432 BALLAST For 3-4 Lamp 24'-32'
|
|
Our Price: $99.95
|
|
|
- Manufacturer: Transco or Allanson
- Manufacturer's Part #: TRA-496-2432
- 3 to 4 Lamps
- 24' FT - 32' FT
- Voltage: 120 Volt
- Starting Method: Rapid Start (RS)
- Line Current: 2.8 Amps
- Substitute for Allanson Ballast if wiring and dimensions are the same
Allanson technical information can be found here: 496-AT Allanson Specs** Also Check out Allanson Sign Ballast **Note* Depending on vendor availability on Transco Ballasts, vendor may ship Allanson sign ballast Both Transco & Allanson ballast are compatible with wiring configurations |
|
|
|
|
|
|
|
|
|
TRANSCO - TRA-472-1624 BALLAST For 2-4 Lamp 16'-24'
|
|
Our Price: $76.35
|
|
|
- Manufacturer: Transco or Allanson
- Manufacturer's Part #: TRA-472-1632 or 472-AT
- 2 to 4 Lamps
- 16' FT - 24' FT
- Voltage: 120 Volt
- Starting Method: Rapid Start (RS)
- Line Current: 2.8 Amps
- Substitute for Allanson Ballast if wiring and dimensions are the same
Allanson technical information can be found here: 472-AT Allanson Specs
** Also Check out Allanson Sign Ballast **
Note* Depending on vendor availability on Transco Ballasts, vendor may ship Allanson sign ballast
Both Transco & Allanson ballast are compatible with wiring configurations
|
|
|
|
|
|
|
|
|
|
TRANSCO - TRA-396-1624 BALLAST For 2-3 Lamp 16'-24'
|
|
Our Price: $78.99
|
|
|
- Manufacturer: Transco or Allanson
- Manufacturer's Part #: TRA-396-1624 or 396-AT
- 2 to 3 Lamps
- 16' FT - 24' FT
- Voltage: 120 Volt
- Starting Method: Rapid Start (RS)
- Line Current: 2.8 Amps
- Substitute for Allanson Ballast if wiring and dimensions are the same
Allanson technical information can be found here: 396-AT Allanson Specs** Also Check out Allanson Sign Ballast **Note* Depending on vendor availability on Transco Ballasts, vendor may ship Allanson sign ballast Both Transco & Allanson ballast are compatible with wiring configurations |
|
|
|
|
|
|
|
|
|
TRANSCO 448-0816 BALLAST For 2-4 Lamp 8'-16'
|
|
Our Price: $64.99
|
|
|
- Manufacturer: Transco or Allanson
- Manufacturer's Part #: 448-0816 or 448-AT
- 2 to 4 Lamps
- 8' Ft - 16' FT
- Voltage: 120
- Starting Method: Rapid Start (RS)
- Line Current: 2.8 Amps
- Substitute for Allanson Ballast if wiring and dimensions are the same
Allanson technical information can be found here: 448-AT Allanson Specs
** Also Check out Alanson Sign Ballast **
Note* Depending on vendor availability on Transco Ballasts, vendor may ship Allanson sign ballast
Both Transco & Alanson ballast are compatible with wiring configurations
|
|
|
|
|
|
|
|
|
|
ALLANSON 472-AT - 120 VOLT - FLUORESCENT SIGN BALLAST - 2 TO 4 LAMPS - 16' FT to 24' FT
|
|
Our Price: $76.35
|
|
|
- Manufacturer: Allanson
- Manufacturer's Part #: 472-AT
- 2 to 4 Lamps
- 16' FT - 24' FT
- Voltage: 120 Volt
- Input Wattage: 724
Ferromagnetic High Output Fluorescent Ballast- Reliable cold-weather operation
- Small Housing Size
- Lowest current draw
(The difference between whether or not to add another costly primary circuit) - For use with Rapid start lamps
(2 pins or hot cathode.) - Recommended for Fluorescent Lighting in Outdoor Sign applications
- 800 mA output for HIgh Output Fluorescent lamps, provides higher light
output, increasing the brilliance of your electrical sign - Thermally protected class "P" ballasts, automatically turn off when the
ballast is hot, thus extend the longevity of the ballasts - High power factor, 277 and 347 volt models reducing operation and installation costs
|
|
|
|
|
|
|
|
|
|
ALLANSON 496-AT - 120 VOLT - FLUORESCENT SIGN BALLAST - 3 TO 4 LAMPS - 24' FT - 32' FT
|
|
Our Price: $99.95
|
|
|
- Manufacturer: Allanson
- Manufacturer's Part #: 496-AT
- Fluorescent Sign Ballast
- 3 to 4 Lamps
- 24' FT - 32' FT
- Voltage: 120 Volt
- Input Wattage: 982
Ferromagnetic High Output Fluorescent Ballast
- Reliable cold-weather operation
- Small Housing Size
- Lowest current draw
(The difference between whether or not to add another costly primary circuit) - For use with Rapid start lamps
(2 pins or hot cathode.) - Recommended for Fluorescent Lighting in Outdoor Sign applications
- 800 mA output for HIgh Output Fluorescent lamps, provides higher light
output, increasing the brilliance of your electrical sign - Thermally protected class "P" ballasts, automatically turn off when the
ballast is hot, thus extend the longevity of the ballasts - High power factor, 277 and 347 volt models reducing operation and installation costs
|
|
|
|
|
|
|
|
|
|
ALLANSON 648-AT - 8' TO 24' - SIGN BALLAST - 4 to 6 FLUORESCENT LAMPS
|
|
Our Price: $125.69
|
|
|
- Manufacturer: Allanson
- Manufacturer's Part #: 648-AT
- Fluorescent Sign Ballast
- 4 To 6 Lamps
- 8' FT - 24' FT
- Voltage: 120 Volt
- Input Watts: 320 Watts
Ferromagnetic High Output Fluorescent Ballast- Reliable cold-weather operation
- Small Housing Size
- Lowest current draw
(The difference between whether or not to add another costly primary circuit) - For use with Rapid start lamps
(2 pins or hot cathode.) - Recommended for Fluorescent Lighting in Outdoor Sign applications
- 800 mA output for HIgh Output Fluorescent lamps, provides higher light
output, increasing the brilliance of your electrical sign - Thermally protected class "P" ballasts, automatically turn off when the
ballast is hot, thus extend the longevity of the ballasts - High power factor, 277 and 347 volt models reducing operation and installation costs
|
|
|
|
